La Crosse Technology Clock WS 8119U User Manual

Congratulations  
You have purchased an atomic digital Atomic Clock from La Crosse  
Technology®, providing the world's most accurate time at a glance, plus  
wireless outdoor temperature.  
Model WS-8119U  
Atomic Digital Wall Clock  
With Time with Seconds, Month, Date, Day, & IN/OUT  
Temperature  
INSTANT TRANSMISSION is the state-of-  
the-art new wireless transmission  
technology, exclusively designed and  
developed by LA CROSSE TECHNOLOGY.  
INSTANT TRANSMISSION offers you an  
immediate update (every 8 seconds!) of all  
your outdoor data measured from the  
transmitters: follow your climatic variations  
in real-time!  
This product offers:  
QUICK SETUP GUIDE  
Features:  
WWVB Radio Controlled Clock (Atomic Clock)  
Time in 12/24 hour format  
Manual time setting option  
Time Zone setting: +/- 12 Hours from GMT  
Daylight Saving Time(DST) On/Off  
Continuous calendar up to year 2054  
Date and weekday displayed and set automatically with the time  
Temperature display in °F or °C  
Snooze function (10 minutes)  
Indoor thermometer  
Wireless Outdoor Temperature Sensor  
Low battery icons for display and sensor  
Table of Contents  
Table of Contents............................................................................................ 1  
Congratulations............................................................................................... 2ꢀ  
Features:......................................................................................................... 2ꢀ  
Setup Information:........................................................................................... 2ꢀ  
Setup Information:  
The Temperature Sensor uses 2 x AAA, IEC LR3 1.5V battery. To install and  
replace the batteries, please follow the steps that follow:  
Position the Atomic Clock and the Outdoor Sensor  
five to six feet apart with nothing between them.  
Insert batteries into the Wireless Outdoor  
Temperature Sensor first - it is important that you do  
not insert the batteries into the Atomic Clock yet.  
You must insert the batteries into the Atomic Clock  
within 3 minutes of inserting the batteries into the  
Sensor.  
The Outdoor Temperature Sensor.................................................................. 2ꢀ  
Positioning the Temperature Sensor: ............................................... 3ꢀ  
To wall mount the Temperature Sensor:........................................... 3ꢀ  
WWVB (Atomic Time) Radio signal: ............................................................... 3ꢀ  
Setup of Time and Display Options:................................................................ 3ꢀ  
1. Set the Time Zone: ....................................................................... 4ꢀ  
2. Set Daylight Saving Time ON/OFF:.............................................. 4ꢀ  
3. Set Language: .............................................................................. 4ꢀ  
5. Set Time Manually - Minute:......................................................... 4ꢀ  
6. Set Date Manually - Year:............................................................. 4ꢀ  
7. Set Date Manually - Month: .......................................................... 4ꢀ  
8. Set Date Manually - Date:............................................................. 4ꢀ  
9. Set Date Manually - Day of Week:................................................ 4ꢀ  
10. Set 12 or 24 Hour Time Mode:.................................................... 4ꢀ  
11. Set Temperature Mode - °F or °C:.............................................. 4ꢀ  
Slide out the battery compartment lid at the bottom of  
the Outdoor Sensor.  
Insert the batteries into the Outdoor Sensor first, observing the  
correct polarity (see markings inside battery compartment). Replace  
the battery holder on the unit.  
Immediately after and within 3 minutes, insert the batteries into the  
Atomic Clock, observing the correct polarity (see markings inside  
battery compartment). Replace the battery cover. The Atomic Clock  
uses 2 x AA batteries ( IEC LR6, 1.5V ).  
The outdoor temperature and the signal reception icon  
should be  
displayed on the Atomic Clock. If this does not happen after 3  
minutes, the batteries will need to be removed from both units and re-  
inserted, following the instructions above.  
Daylight Saving Time...................................................................................... 4ꢀ  
Setting the Daily Alarms:................................................................................. 4ꢀ  
About the Daily Alarms: ........................................................................... 5ꢀ  
Automatic Snooze function: ............................................................................ 5ꢀ  
Online Resources ............................................Error! Bookmark not defined.ꢀ  
Care and Maintenance.....................................Error! Bookmark not defined.ꢀ  
Note: In the event of changing batteries in any of the units, all units need to  
be reset by following the setting up procedures. This is because a random  
security code is assigned by the Sensor at start-up and this code must be  
received and stored by the Atomic Clock in the first 3 minutes of power being  
supplied to it  
Note: If the signal reception is not successful on the first frequency  
(915MHz) for 22 seconds, the frequency is changed to 920MHz and the  
learning is tried another 22 seconds. If still not successful the reception is  
tried for 22 seconds on 910MHz. This will also be done for re-  
synchronization.  
Battery Replacement ...................................................................................... 5ꢀ  
The Low Battery Icons:..................................................................... 5ꢀ  
Specifications.................................................................................................. 5ꢀ  
Power Requirements ...................................................................................... 6ꢀ  
FCC Statement ............................................................................................... 6ꢀ  
Warranty Information ...................................................................................... 6  
The Outdoor Temperature Sensor  
Remote transmission of outdoor temperature to Temperature Station  
by 915 MHz  
Shower proof casing  
Page 1 of 6  
Page 2 of 6  
 
To set the Alarm Time - Hour: Press and hold down the "ALARM"  
button for 2 seconds until the hours digits flash. Use the “PLUS”  
button to set the hour. Press the "ALARM" button to confirm your  
setting and move to setting the minutes.  
To set the Alarm Time - Minutes: The Minutes digits of the Alarm  
Time will flash. Use the “PLUS” button to set the minutes. You can  
hold the "PLUS" button in to speed up the setting of minutes by using  
five minute increments. Press the "ALARM" button to confirm your  
minutes setting and to end the setting procedure.  
Power Requirements  
Note: Rechargeable batteries are not recommended due to the wide  
variation in performance between brands and types. Please use only fresh  
alkaline batteries.  
Atomic Clock: 2 “AA” Alkaline Batteries (not included)  
Wireless Outdoor Temperature Sensor:  
2 “AAA” Alkaline Batteries (not included)  
To activate or deactivate the daily alarms, briefly press the “ALARM”  
button once. When the alarm is active the clock displays the alarm  
FCC Statement  
icon  
icon  
below the word "ALARM". When deactivated, the alarm  
does not display.  
FCC ID: OMO-TX38U  
This device complies with part 15 of the FCC rules. Operation is subject to  
the following conditions: (1) This device may not cause harmful interference,  
and (2) This device must accept any interference received, including  
interference that may cause undesired operation.  
Freq. 915 MHz  
About the Daily Alarms:  
After 30 seconds without pressing any button the clock switches  
automatically from alarm setting mode to normal clock mode.  
The alarm will sound for 85 seconds if not deactivated. You can  
deactivate it by pressing any button. The alarm will be repeated  
automatically after 24 hours.  
La Crosse Technology  
Model: TX38-IT-N  
Made in China  
The alarm uses 3 different patterns of tone, beginning gently and  
increasing in intensity, known as a "Crescendo Alarm". The effect is to  
provide increasing levels of alarm to ensure waking while providing a  
gentle alarm to lighter sleepers.  
Warranty Information  
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against  
manufacturing defects in materials and workmanship.  
This limited warranty begins on the original date of purchase, is valid only on products  
purchased and used in North America and only to the original purchaser of this product. To  
receive warranty service, the purchaser must contact La Crosse Technology, Ltd for  
problem determination and service procedures. Warranty service can only be performed by  
a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must  
be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse  
Technology, Ltd’s authorized service center.  
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge  
as stipulated herein, with new or reconditioned parts or products if found to be defective  
during the limited warranty period specified above. All replaced parts and products become  
the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology,  
Ltd.  
Automatic Snooze function:  
While the alarm is sounding, press the "SNOOZE" button to activate  
the snooze function. The alarm icon  
flashes on the display until  
the alarm sounds again when the Snooze period is over (10 minutes).  
Pressing the "SNOOZE" button moves the alarm back by 10 minutes  
and the alarm will restart at this time.  
The Snooze function can be interrupted by pressing any button.  
Replacement parts and products assume the remaining original warranty, or ninety (90)  
days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and  
materials for all repairs covered by this warranty. If necessary repairs are not covered by  
this warranty, or if a product is examined which is not in need of repair, you will be charged  
for the repairs or examination.  
The owner must pay any shipping charges incurred in getting your La Crosse Technology,  
Ltd product to a La Crosse Technology, Ltd authorized service center.  
Battery Replacement  
If you notice that the LCD appears faint or that WWVB time reception  
is not working properly, try a fresh set of batteries before contacting  
customer support.  
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship  
with the following specified exceptions: (1) damage caused by accident, unreasonable use  
or neglect (including the lack of reasonable and necessary maintenance); (2) damage  
occurring during shipment (claims must be presented to the carrier); (3) damage to, or  
deterioration of, any accessory or decorative surface; (4) damage resulting from failure to  
follow instructions contained in your owner’s manual; (5) damage resulting from the  
performance of repairs or alterations by someone other than an authorized La Crosse  
Technology, Ltd authorized service center; (6) units used for other than home use (7)  
applications and uses that this product was not intended or (8) the products inability to  
receive a signal due to any source of interference.  
The Low Battery Icons:  
When the batteries need to be replaced in the Wireless Outdoor  
Sensor, the LCD will display the “TX” icon.  
When the batteries need to be replaced in the Atomic Clock, the LCD  
will display the “RX” icon.  
This warranty covers only actual defects within the product itself, and does not cover the  
cost of installation or removal from a fixed installation, normal set-up or adjustments, claims  
based on misrepresentation by the seller or performance variations resulting from  
installation-related circumstances.  
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL,  
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH  
THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO  
BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS  
PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH.  
We recommend that you replace the batteries in all units  
regularly to ensure optimum accuracy of these units. Please  
see the battery life in the specifications below.  
Help us to keep our environment clean. Return used batteries  
to an authorized depot.  
This warranty gives you specific legal rights. You may also have other rights specific to your  
State. Some States do no allow the exclusion of consequential or incidental damages;  
therefore the above exclusion of limitation may not apply to you.  
Specifications  
Battery Life - Atomic Clock: Up to 24 months  
For warranty work, technical support, or information contact:  
Battery Type - Atomic Clock: 2 X AA (IEC LR6, 1.5V)  
Battery Life - Wireless Outdoor Temperature Sensor: Up to 12 months  
- 2 X  
La Crosse Technology, Ltd  
2817 Losey Blvd. S.  
La Crosse, WI 54601  
Battery Type - Wireless Outdoor Temperature Sensor: 2 X AAA (IEC  
LR3, 1.5V)  
Indoor thermometer measurement range:  
14.2°F to 99.9° F (-9.9°C to 37.8°C)  
Indoor temperature update interval: every 16 seconds  
Wireless Outdoor Temperature Sensor measurement range: -39.8° F  
to 139.8° F (-39.9° C to 59.9° C)  
Outdoor temperature update interval: every 8 seconds  
Wireless Outdoor Temperature Sensor transmission range: 200 feet.  
Dimensions - Atomic Clock: 8.95” L x 1.20” W x 7.20” H  
Dimensions - Wireless Outdoor Temperature Sensor: 1.27” L x 0.55”  
W x 3.41” H  
All rights reserved. This handbook must not be reproduced in any form,  
even in excerpts, or duplicated or processed using electronic, mechanical or  
chemical procedures without written permission of the publisher.  
This handbook may contain mistakes and printing errors. The information in  
this handbook is regularly checked and corrections made in the next issue.  
We accept no liability for technical mistakes or printing errors, or their  
consequences.  
All trademarks and patents are acknowledged.  
Page 5 of 6  
Page 6 of 6  
 

LG Electronics Computer Monitor W2241S User Manual
Lightolier Indoor Furnishings WLRN124120SB User Manual
Lincoln Electric Portable Generator IM972 User Manual
LST Home Security System SZ58 3 User Manual
Makita Portable Generator G2400R User Manual
Maytag Clothes Dryer MEDE300VF0 User Manual
McCulloch Chainsaw Aug 42 User Manual
Melissa Light Therapy Device 637 001 User Manual
Meridian Audio MP3 Player P86017 User Manual
Metrologic Instruments Scanner MS 5145 User Manual