La Crosse Technology Watch EH 21G User Manual

The atomic watch’s internal computer processes the  
received time signals and automatically synchronizes  
the hands, date and the change over between daylight  
saving time and standard time as well as the leap year  
accordingly. The signal reception and synchronization  
occur automatically every night and manually upon  
demand.  
Even outside of the reception range your atomic watch  
will continue to keep excellent time. The highly  
accurate 32 kHz quartz movement will ensure precise  
time keeping.  
Analog Watch Instruction Manual  
2. Functional Description  
T1 Button (mode):  
Welcome to the world of radio-controlled timekeeping  
technology. We hope you will enjoy the convenience of  
never having to set your watch again and the confidence of  
knowing exactly what time it is. Your new radio-controlled  
watch is a special edition produced by La Crosse  
Technology specifically for E. Howard. It will provide you  
with years of trouble free, easy operation and the most  
accurate time in the world.  
The T1 button has two functions:  
1. Switches the digital display between date (for  
example 12.19) and seconds (for example 32).  
2. Receives the WWVB time signal and synchronizes  
the time automatically if you press it for longer  
than 3 seconds.  
1. Description of WWVB  
T2 button (adjust):  
The most accurate clock in the United States is the  
atomic cesium clock located at:  
Depending on the mode the T2 button either:  
1. Indication of adjusted time zone (T2 < 3 sec).  
2. Advances the time zone in 1-hour increments  
when setting the time zones.  
U.S. Department of Commerce  
National Institute of Standards and Technology  
(NIST)  
Boulder, Colorado  
3. Advances the hands when manually synchronizing  
the watch.  
Your atomic watch receives time signals on long wave  
radio (60 kHz) from the NIST operated WWVB time  
signal transmitter located in Fort Collins, CO and  
coupled with the atomic cesium clock in Boulder. Until  
recently, the transmitter was used predominantly by  
telephone companies, radio and television stations,  
navigations of planes and ships and for scientific  
purposes in laboratories. Now this precise signal can  
be received by the atomic watch technology.  
Your atomic watch receives the WWVB time signal via  
its built-in antenna system. The proper function of the  
receiver contained in this product has been tested as a  
prototype with regard to its sensitivity and range of  
reception in different places throughout the United  
States.  
3. Synchronizing the Time (signal reception)  
The signal reception and synchronization occurs  
automatically every night. At any desired time you can  
perform a “manual” reception by pressing the T1 button  
for at least 3 seconds. The hands will set to the 12  
o’clock position (if the hands set to a time other than  
exactly 12 o’clock they must be repositioned. See  
under 5. Replacing the battery) during reception and  
will reset themselves thereafter. Note that your atomic  
watch will not receive the WWVB time signal if set to a  
time zone other than Pacific, Mountain, Central or  
Eastern standard time.  
Any claim for warranty – express or implied – due to the  
watch’s failure to properly receive the radio signal due  
to interference, whatever may be the source of this  
interference, are hereby expressly excluded in all  
respects. For more information about the WWVB-  
Radio signal please visit the NIST website at:  
For actual signal coverage in North America please  
visit:  
4. Setting the Time Zone  
htm.  
The time preset by the factory might not be the correct  
time for the time zone you are in. To set the correct  
time zone please follow the instructions listed below:  
1. Press the T2 button. The digital display will  
change from displaying the date (for example,  
12.19) to displaying the current hour (for example  
P02 PM). The letter P, M, C or E in front of the  
digitally displayed hour stands for Pacific,  
Mountain, Central or Eastern standard time zone  
respectively. If no letter is displayed in front of the  
hour a different time zone has been selected.  
 
WARRANTY INFORMATION  
This warranty gives you specific legal rights. You may also  
have other rights specific to your State. Some States do no  
allow the exclusion of consequential or incidental damages  
therefore the above exclusion of limitation may not apply to  
you.  
La Crosse Technology, Ltd provides a 10-year limited  
warranty on the movement of this product against  
manufacturing defects in materials and workmanship. All  
other components of the watch including the lens and strap  
are warranted for 1-year against manufacturing defects in  
materials and workmanship.  
For warranty work, technical support, or information contact:  
La Crosse Technology, Ltd  
2809 Losey Blvd S.  
La Crosse, WI 54601  
Phone: 608.782.1610  
Fax: 608.796.1020  
This limited warranty begins on the original date of purchase,  
is valid only on products purchased and used in North  
America and only to the original purchaser of this product.  
To receive warranty service, the purchaser must contact La  
Crosse Technology, Ltd for problem determination and  
service procedures. Warranty service can only be  
performed by a La Crosse Technology, Ltd authorized  
service center. The original dated bill of sale must be  
presented upon request as proof of purchase to La Crosse  
Technology, Ltd or La Crosse Technology, Ltd’s authorized  
service center.  
e-mail:  
(warranty work)  
(information on other products)  
La Crosse Technology, Ltd will repair or replace this product,  
at our option and at no charge as stipulated herein, with new  
or reconditioned parts or products if found to be defective  
during the limited warranty period specified above. All  
replaced parts and products become the property of La  
Crosse Technology, Ltd and must be returned to La Crosse  
Technology, Ltd. Replacement parts and products assume  
the remaining original warranty, or ninety (90) days,  
whichever is longer. La Crosse Technology, Ltd will pay all  
expenses for labor and materials for all repairs covered by  
this warranty. If necessary repairs are not covered by this  
warranty, or if a product is examined which is not in need or  
repair, you will be charged for the repairs or examination.  
The owner must pay any shipping charges incurred in  
getting your La Crosse Technology, Ltd product to a La  
Crosse Technology, Ltd authorized service center. La  
Crosse Technology, Ltd will pay reasonable return shipping  
charges to the owner of the product.  
web:  
All rights reserved. This handbook must not be reproduced  
in any form, even in excerpts, or duplicated or processed  
using electronic, mechanical or chemical procedures without  
written permission of the publisher.  
This handbook may contain mistakes and printing errors.  
The information in this handbook is regularly checked and  
corrections made in the next issue. We accept no liability for  
technical mistakes or printing errors, or their consequences.  
All trademarks and patents are acknowledged.  
Your La Crosse Technology, Ltd warranty covers all defects  
in material and workmanship with the following specified  
exceptions: (1) damage caused by accident, unreasonable  
use or neglect (including the lack of reasonable and  
necessary maintenance); (2) damage occurring during  
shipment (claims must be presented to the carrier); (3)  
damage to, or deterioration of, any accessory or decorative  
surface; (4) damage resulting from failure to follow  
instructions contained in your owner’s manual; (5) damage  
resulting from the performance of repairs or alterations by  
someone other than an authorized La Crosse Technology,  
Ltd authorized service center; (6) units used for other than  
home use (7) applications and uses that this product was not  
intended or (8) the products inability to receive a signal due  
to any source of interference.. This warranty covers only  
actual defects within the product itself, and does not cover  
the cost of installation or removal from a fixed installation,  
normal set-up or adjustments, claims based on  
misrepresentation by the seller or performance variations  
resulting from installation-related circumstances.  
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME  
LIABILITY FOR INCIDENTAL, CONSEQUENTIAL,  
PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED  
WITH THE OPERATION OR MALFUNCTION OF THIS  
PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR  
MEDICAL PURPOSES OR FOR PUBLIC INFORMATION.  
THIS PRODUCT IS NOT A TOY. KEEP OUT OF  
CHILDREN’S REACH.  
 

Learning Resources Games LER 7202 User Manual
Lenovo Computer Accessories 1814 User Manual
Liebherr Appliance Trim Kit 7083 247 00 User Manual
Lightolier Work Light 7589AZ User Manual
Linksys Switch SR224G User Manual
Lowrance electronic GPS Receiver ELITE 4M User Manual
LST Smoke Alarm 5351TE User Manual
Makita Planer 2030S User Manual
Maytag Air Cleaner MT AP250450 User Manual
Melissa Hair Dryer 635 068 User Manual