Life Fitness Service Kit Instruction (GK61-00002-0008)
HOW TO... REPLACE ROCKER ARMS
Tools required: Snap ring pliers, 3/8 Socket set, and Standard wrench set
Step 1
Unplug the unit at the electrical outlet.
Step 2
End Ca p
Torque
Roc ke r Arm s
Raise the boot covers on the upper arms then remove
three mounting bolts from each upper arm.
30-35 FT. LBS.
Step 3
Bolts(2)
If equipped, remove the clevis covers.
Step 4
Remove the nut and bolt securing the PEDAL LEVER to
the ROCKER ARM, and lower the pedal lever.
Step 5
Pe da l Le ve r
Remove the END CAP and internal snap from the rocker
arm.
Step 6
Remove the rocker arm.
Step 7
Install the new rocker
arm in reverse order.
Sna p
Ring
NOTE: For units
Fla t Wa she rs
Sna p
without clevis covers,
plug the square holes
in the bottom of the
rocker arms with the
supplied plugs.
Ring
NOTE: For units with
clevis covers, insert
the nylon grommets
(nuts) as supplied,
then install clevis
covers.
Wa ve
Wa she r
Roc ke r Arm
Inse rt Plug or Nylon Grom m e t
into squa re ope ning
M051-00K61-A022
|
Kuma Stoves Stove AR 10 User Manual
Lanier All in One Printer 5515 User Manual
Linear Intercom System DMC 10AWP User Manual
Linear Satellite Radio DXS 32 User Manual
Magnavox DVD Recorder 1VMN29896 User Manual
Makita Impact Driver 6910 User Manual
Matrix Audio Speaker 801 SERIES 2 User Manual
Matrox Electronic Systems Computer Hardware Matrox RTX2 User Manual
MGE UPS Systems Switch STS 200A User Manual
MicroBoards Technology DVD Recorder QDL 1000 User Manual